Sensor-driven irrigation: the right amount at the right time

Automatic irrigation systems consist of valve boxes, control units and sensors. Irrigation starts on programmed schedules; a rain sensor stops the cycle when precipitation is detected, a moisture sensor shortens run time based on soil saturation, and a wind sensor prevents ineffective sprinkling.

Drip lines deliver water directly to the root zone in gardens, greenhouses and tree planting areas. Sprinkler systems suit large lawns and landscape projects. Both methods can be managed from a single centre via valve boxes and an automation panel.

Sensor selection depends on area size, plant type and climate. In Sakarya and surroundings, summer drought and sudden rainfall occur together, so a rain + moisture sensor combination gives the best results. A wind sensor is recommended for open land and rooftop applications.

During installation, the pressure regulator, filter and pipe diameter must be sized correctly. Low pressure reduces emitter efficiency; high pressure causes fitting leaks. Ecoteam produces a line diagram after a site survey and delivers with sensor integration tested.

Proper automation can save 30–50% of irrigation water. Existing manual systems can also be upgraded with sensors and a control unit. Ecoteam offers site surveys and quotes for irrigation equipment and automation solutions.